Great service and looking for resellers.

I use InPhonex as my primary VoIP home phone service.
But there are many to choose from. Everyone has a different experience with the different service providers. So, who is best is really kind of luck of the draw.
No matter what service you get, some people will love it, and others will hate it……

VoIP,email,web browsing, downloading files, videos, music, etc are all competing for the same limited bandwidth space.
Combine all that with the fact that many ISP’s don’t always truly deliver the bandwidth they promise and now that big data pipe becomes a narrow pipe trying to squeeze at that data through at the same time.

1) Buy the fastest service you feel comfortable paying for.
But, I have heard stories where the ISP’s don’t always deliver all that extra bandwidth you are paying for…. so what can your do but give it a shot…

2) Of all the data services, VoIP is a “real-time” data service. It can’t tolerate data bottle-necks like other data sources can. When your data pipe gets squeezed, VoIP suffers the most. VoIP can’t tolerate dropped packets, or even delayed packets like other services can.

Sometimes we just can’t have it all at the same time. Use discretion when you do heavy surfing and downloading. Try to make your VoIP calls during your data lulls rather than on the usage highs.

3) When you have a choice, use lower bandwidth VoIP Codec compression. Lower bandwidth, high compression Codecs are more bandwidth efficient and often provide better effeciency thant the high-qualigy Codecs.

For example, the standard high quality VoIP Codecs are:
G.711u/a (also known as PCMU/PCMA). I don’t have exact figures, but typical bandwidth required for each leg of a G.711u VoIP call is about 64Kbps. But, when combined with call management bandwidth it can require up to 110Kbps… each direction. So, full duplex conversation could conceivably require about 220 Kbps. That may not sound like much for a high speed connection, but don’t forget that 200+ Kbps VoIP data is competing with all the other data transfers occuring over your Internet connection.

When you have a choice, it is preferable to use a high compression Codec like G.729a. G.729a is rated somwhere around 32 Kbps bandwidth per leg (+ overhead)This Codec only uses about one-half the bandwidth of G.711u/a. So, just by using G.729a your could end up with better call quality just because your not dropping so many packets in the bottle-neck.
Most VoIP carriers will recommend you use G.729a in the name of reducing bandwidth. The difference in voice quality is minimal - and you may end up with less jitter and drop-outs.

If I recall, Vonage allows you to adjust your VoIP bandwith through your user admin web page. The feature is called “Bandwidth Saver”. For the laymans sake, they just call the bandwidth settings as High, Medium, and Low (rather than confusing you with Codec standards names). In reality, your are just selecting different Codec compression algorithms. I think the low setting is something like the GSM Codec, which is basically mobile phone voice quality.

4) All the above is the easy way to improve your VoIP call quality. Now for the technical side… and not so easy - QOS.

QOS - Quality of Service settings.
How to do this in detail is beyond what can be explained here.

QOS, in essence, is the prioritizazation of VoIP packets.
When many kinds of data are competing for the same space within a limited data pipe, QOS acts like the traffic cop directing the flow of traffic. With QOS, you would want to establish that VoIP devices get priority of data traffic over other data flows, like email, web, and file transfers to your PC.

The trick with QOS is that you need a router that has QOS priority features. Then you have to configure the QOS setting in the router to give the VoIP adapters “Highest Priority” over other data traffic. How this is implemented may vary from Router to Router.

Take for example, I have a Linksys WRT54G NAT/Router and a PAP2T-NA VoIP adapter (ATA). The ATA is assigned an IP Address by the router. The ATA also has a unique MAC Address. The key here is that I had to configure the WRT54G to priortize data flow to the specific IP address (and ports) as required by my ATA. Now, once QOS is correctly configured and routed, my ATA VoIP call data gets top priority over competing data on the data pipe flowing through my Router. (Some routers may be able to prioritize based on MAC address of the ATA too)

Some ATA’s are combo boxes that combine the NAT/Router and a VoIP adapter in one box. The Linksys SPA2102 and SPA3102 are examples. I haven’t used those boxes, so I don’t know how they are set-up for QOS, by default. I would hope they give all data to the built-in ATA top priority data flow.

So, in a nut shell, that’s the best advice I can give here.
Hope it helps.
(It may not solve your problems, but may give you a better understanding of whats happening, or needs to be done)